Microcement without problems
A remodelling with microcement carried out by experienced professionals and with high quality products avoids the emergence of problems during and after its finalisation.
The first step is to choose a specialist who knows the different materials and chooses the best quality.
Differentiate the types of microcement and apply them on the surface for which have been developed is essential to guarantee a successful remodelling. Appropriate advice begins with the analysis of the surface to be coated and a calculation of the products, time and costs adjusted to the square metres to be remodelled.
To place the microcement it is not necessary to remove the original support, but it must be prepared correctly. If there are joints in the floor or walls, the difference in height between the material and the joints must be levelled. Once the base is levelled, a primer must be applied, this will guarantee the adherence between the existing and the new material, leaving the surface with a homogeneous porosity. It is also advisable to use a fibre glass mesh to prevent the base from cracking.
The instructions for using the microcement must be strictly followed to ensure a work without problems. A good professional will correctly mix the components of the different products to ensure the maximum performance of the products (hardness, impermeability, etc ...). On the other hand, respect the drying times is essential to avoid the appearance of moisture stains. Following the step of application, there won't be any problem.